Review

The Soviet Union's JS-2 marked the pinnacle of tank development in World War II with its 122mm gun and well-sloped, heavy armor. Tamiya's model has parts for one JS-2, including two figures.

The kit's dark green parts are beautifully cast with crisp panel lines and fine bolt detail. Cast texture on the hull and turret is outstanding, and there are nice weld seams and torch-cut textures. A small photo-etched metal fret includes two intake grates for the engine deck. Nylon cord is provided for tow cables.

You can choose from vinyl or link-and-length tracks. The latter has a bottom run as well as short, slightly curved lengths for the front and rear. Two forms for the top lengths allow builders to easily model the appropriate sag. Very nice!

A small decal sheet gives markings for four vehicles. Two are for the Red Army, Berlin, 1945, with white air-recognition crosses on the turret. Polish and Czech tanks are also included. The decals are in-register, although the red seems to bleed through the white eagle on the Polish 4th Heavy Tank Regiment insignia.

I deviated from the instructions by painting the wheels on the sprues and assembling them after painting the hull.

The model builds beautifully. Everything fits perfectly; I had only to scrape a couple of minor mold seams on the suspension arms. A drop of superglue filled a tiny gap between the glacis plate and lower hull. I love the effect of the engine louvers under the photo-etched metal grilles. Sponson blanking plates are included. I attached the tools, tow cables and auxiliary fuel tanks before painting.

The gun-barrel halves fit perfectly; the seams disappeared with a couple swipes of a sanding stick. The two-part muzzle brake needed a little more work, but it looks great. Poly caps in the mantlet allow the gun to elevate.

The turret halves attach along a natural seam. Grab handles outside the turret have very faint, molded locating marks, allowing their omission as necessary; some tanks had all the grab handles, others had just one or two. The handles are scale thin.

The wheel halves sandwich poly caps, making drive assembly a snap. The forms for the sagging tracks worked well, but they are handed: the loop from the idler to the first return roller is longer than the loop from the last return roller to the drive sprocket, so the ridge on the form goes toward the front of the tank. The instructions warn you to mind the direction of the tracks, but they show the left run backwards.

Despite instructions showing how many links were needed for the curves, mine came up short one link. Unfortunately, there are two types of link, with a guide horn on alternating links making it hard to fill in with just one. I attached the extras at the idler so the extra guide horn is not visible. I also test-fitted the vinyl tracks and found them very tight around the wheels.

Two figures in casual poses occupy the turret hatches. They are the weakest part of the kit; good poses, but the facial expressions are a little flat, and there are heavy mold seams.

Tamiya's JS-2 is the perfect mix of ease of building and good, accurate detail. It isn't for absolute beginners, but any modeler who's built a couple of kits will enjoy the smart engineering. "Superdetailers" and diorama builders will love the possibilities this new model offers.