Press Release
Plastic Model Kits
November, 2008
388 1/35 VRC-105 Spanish Army Centauro" RCV 100% NEW TOOL! $54.95: Kit consists of 411 parts on 7 sprues plus copper towing cable, 8 rubber tires and 34 photo etched parts. Additional features: suspension and drive train are all individual parts, excellent tread pattern and sidewall details on tires, excellent surface details, top-mounted machine gun 42/59 is included. Markings for RLAC-9 Numancia, RLAC-11 Espana and RCL-8 Lusitania regiments.
703 1/16 WWII Soviet Officer Figure #1 (standing with arms out) $24.95: Kit consists of 23 parts on 3 sprues plus display base.
704 1/16 WWII Soviet Officer Figure #2 (standing with hands on hips) $24.95: Kit consists of 24 parts on 3 sprues plus display base.
1625 1/72 Su-15 UM Flagon-G Soviet Fighter $33.95: Kit consists of 106 parts on 6 sprues plus markings for Soviet Air Force Blue 30 & Blue 60 and Ukrainian Air Force Blue 70.
2272 1/32 F-8E Crusader US Navy Fighter 100% NEW TOOL! $149.95: Kit consists of 356 parts on 12 sprues w/photo etched safety harnesses & turbofan. Additional features: Detailed J57 turbojet engine/machine gun compartment door which can be assembled open or closed, wings can be assembled in folded or extended position, positionable flaps, an assortment of bombs & missiles. Completed kit measures over 20" long with a wingspan of over 13". Markings include USN VF-162 USS Oriskany & VF-194 USS Ticonderoga.
4533 1/350 Kirishima DDG-174 JMSDF Destroyer $84.95: Kit consists of 300 parts on 8 sprues, plus an SH-60J helicopter. Additional features: Full or waterline hull variants can be constructed, separate sonar details included, hangar deck can be assembled open or closed, 127 mm machine gun turrets in fine detail. Markings are for Div 61 Yokosuka. Completed kit measures over 18" long.
5744 1/700 USS Minneapolis CA-36 Heavy Cruiser, 1942 $36.95: Kit consists of 196 parts on 10 sprues. Additional features: waterline or full hull assembly, 8 inch gun turrets, two SOC seagull planes and display stand. Markings are for MS21 camouflage, 1942.
7273 1/72 German SdKfz 186 Jagdtiger Tank (Porsche Model) $18.95: Kit consists of 80 parts on 3 sprues. Markings for 305009 Germany 1944, 1-color camouflage.
7291 1/72 German SdKfz 182 King Tiger Tank w/Zimmerit (Henschel Turret) $18.95: Kit consists of 108 parts on 6 sprues. Markings for Abt 505 # 212, 3-color camouflage.
October, 2008
382 1/35 Polish PT-76B Amphibious Tank $47.95
Kit consists of 187 parts on 5 sprues plus hull & tracks. Markings for Polish Marine Brigade #4607. Additional features: towing cable, accurately molded sprocket wheels, independent suspension arms, hatches can be assembled open or closed, 12.7mm machine gun w/detail parts & photo etched engine deck grills & light guards.
1633 1/72 Vickers Wellington GR.Mk XIV British Torpedo Bomber $47.95
Kit consists of 205 parts on 10 sprues, with markings for #304 Sqn RAF 1944 & #458 Sqn, Bone, RAF Algeria, late 1943. Additional kit features: Engine cowling to precise detail and dimensions, honeycomb structure at the wings replicated in fine detail, clear parts included for nose and rear gun turrets.
1654 1/72 English Electric (BAC) Lightning F.2A/F.6 Fighter NEW TOOLING! $36.95
Kit consists of 88 parts on 8 sprues, with markings for XR 753, 23rd Sqn, RAF, 1970. Includes Two Red Top missiles w/clear parts, a ventral pack to convert the F.2A to the F.6.
2258 1/32 F6F-3N Hellcat Night Fighter $96.95
Kit consists of 377 parts on 10 sprues, 4 rubber tires, clear cowling, film instrument panel & photo etched seat belts. Markings are for #319 USS Solomon Is, Nov 1944 & #6 VF(N)-76 USS Charger, Oct 1943. Additional features: clear engine cover to show full detail, detailed engine accessory compartment, machine gun access door on wings can be opened or closed, flaps are positionable, wings can be folded or opened, external drop tanks & rockets.
3907 1/144 Tu-16K-26 Badger G Soviet Twin-Engine Jet Bomber $39.95
NEW TOOLING! Kit consists of 87 parts on 5 sprues with markings for the Soviet Air Force. Additional features: includes missile, rotated ventral and dorsal tail gun turret, clear nose section.
4520 1/350 Russian Battlecruiser "Admiral Ushakov" $149.95NEW TOOLING! Kit consists of 491 parts on 16 sprues plus hull and deck, and markings for the Russian Navy. Additional feature: One piece hull, separate sonar parts, hangar deck at stern can be assembled open or closed, 3D search radar (reproduced in photo etch) and main mast made of clear parts with pattern replicated, Ka-27 copter included, photo etched funnel racks, additional photo etched radar parts. Completed kit measures over 28" long!
5747 1/700 USS San Francisco CA-38 Heavy Cruiser, 1944 $36.95 NEW TOOLING!
Kit consists of 202 parts on 9 sprues plus hull and waterline plate. Markings are for Measure 33/13d, Camouflage, 1933. Additional features include: Waterline or full hull variant, two SOC aircraft, deck wood pattern.
7286 1/72 US M26A1 Pershing Heavy Tank NEW TOOLING! $18.95
Kit consists of 168 parts on 4 sprues plus hull and tracks. Markings for USA Army. Additional features include: independent suspension arms, detailed sprocket whls and suspension, 90mm M3A1 gun, double pin T80E1 individual track links.
7287 1/72 US T26E4 Pershing Heavy Tank NEW TOOLING! $18.95
Kit consists of 115 parts on 3 sprues plus hull and tracks. Markings for US Army. Same features as above, except with longer gun.
9910 Rivet Maker Tool (carded) $9.95
9912 Panel Line Engraver Tool (carded) $9.95
September, 2008
395 1/35 M1127 Stryker Reconnaissance Vehicle (RV) $47.95
Kit consists of 440 parts on 15 sprues. Features: converted one-piece multi-slide molded lower hull, underside detailed suspension, central drive train with differentials and drive shafts, rear panel with separate ramp and crew entry doors, inside/outside latch handles, large jerry can racks, rubber tires and newly 2-directional slide molded upper hull. Also includes three sheets of photo-etch parts for the machine gun & jerry can mounts. Markings for US Army.
911 1/16 M16 Halftrack with Multiple-Gun ALL NEW TOOLING! $249.95
Kit consists of 482 parts on 25 sprues plus cabs, compartment & cast metal chassis. Features: interior details, full drive train with engine transmission & suspension, rubber tires & tracks, multi-directional slide molded sprocket wheel, fully detailed engine, armored front grill, metal front roller tow chain & rear tow hook. Includes four M2HB machine guns with M45 pedestal mount, M2HB machine guns, steering mechanism and photo-etch engine fan, visors, etc. Completed kit measures over 16" long!
1622 1/72 CH-47D Chinook Helicopter $32.95
Kit consists of 118 parts on 4 sprues plus left and right fuselages. Features: two-directional slide molded fuselages, two engine cowlings, rotating rotors, detailed cockpit/instrument panel, open or closed position crew entry door & rear cargo ramp. Includes optional retracted or closed hitch. Markings for US Army 101st Airborne Corps Gulf War 1991 & 159th Aviation Battalion 101st Airborne Div.
2248 1/32 F8F-2 Bearcat Fighter $89.95
Kit consists of 364 parts on 13 sprues plus clear cowling. Features: full interior engine, detailed machine gun compartment, open or closed access doors, optional position flaps, external drop tanks & detailed cockpit. Includes M2 machine gun barrels, R-2800-34R 18-cylinder radial engine, photo-etch instrument panel a nd safety harnesses, and rubber tires. Markings are for #121730 of VF-151, CV-21 USS Boxer 1950 and N198F/122637.
4529 1/350 Shenyang PLA Navy Type 051C DDG-115 Chinese Destroyer ALL NEW TOOLING! SRP $74.95
Kit consists of 297 parts on 8 sprues. Features: one-piece hull & helicopter flight deck pattern. Includes 100mm gun turrets, six large size revolver vertical launching systems, top dome target tracking radar, eight anti-ship missile box launchers, photo-etched mast parts, crew figures and a display stand. Completed model measures over 17" long. Markings for PLA Navy's first-of-the-class 115 Shenyang & second Type 051C Luzhou class 116 Shijiangzhuang.
7253 1/72 WWII German FAMO 18t SdKfz.9/1 Heavy Halftrack Prime Mover with 6-ton Bilstein Crane (Early) $25.95
Kit consists of 325 parts on 10 sprues and markings for German Army. Features: newly tooled three-directional slide molded chassis frame with suspension arm, sprocket wheels, road wheels, crane platform, rubber tires, 200 individual track links, thread for tow cable & clear sheet for windscreen. Markings for German Army.
7258 1/72 German Sturmgeschutz III Ausf.E Tank $17.95
Kit consists of 82 parts on 4 sprues with full length vinyl tracks, roller wheels, two-directional slide molded lower hull with suspension arm details & markings for German Army.
7259 1/72 German Sturmgeschutz III Ausf.F Tank $17.95
Kit consists of 82 parts on 5 sprues with full length vinyl tracks, roller wheels, two-directional slide-molded lower hull with suspension arm details, slide molded gun barrel & markings for German Army.
7301 1/72 JMSDF Landing Craft/Air Cushion (LCAC) ALL NEW TOOLING! $99.95
Kit consists of 338 parts on 9 sprues. Features: one-piece hull with full deck, cargo deck scupper pattern, one-piece rubber air cushion, detailed ramp, four-directional slide molded operating house, three-directional slide molded personnel cabin, detailed turbine room & large 4-bladed propeller. Includes clear parts for operating house windows and photo-etch parts for mesh. Suitable for use with 1/72 tanks (not included). Completed kit measures nearly 15" long. Markings for JMSDF LCAC-2101 to 2106.
August, 2008
1317 1/144 F-22A Raptor Fighter $9.95 Kit consists of 67 parts on 2 sprues plus fuselage. Markings are for Langley AFB, Nellis AFB and Edwards AFB.
1535 1/35 M1A1/A2 Abrams Tank, "5 in 1" kit $36.95 Box contains 616 parts suitable to make any one of 5 variants: M1A1HA, M1A1HA with Track Width Mine Plow (TWMP), M1A1HA with Mine roller, M1A2 Abrams or M1 Panther II Mine Clearing Tank. Includes chain for mine plough, film part for periscopes, and 5 different markings, one for each variant.
1627 1/72 Wellington Mk.III Bomber $47.95 Kit consists of 203 parts, including nose and rear gun turrets, precise engine cowling and "honeycombed" wing structure.
2270 1/32 Su-27UB Flanker-C 2-seater Russian Trainer Aircraft $199.95 New tooling added: an extended upper fuselage, a longer clear canopy, a two seat cockpit and modified left and right air intakes. Kit consists of 445 parts including metal ally landing struts, a metal alloy pilot figure, photo etched hinges and harness parts, metal shock springs, screws and flaps and aileron rotating shafts. Marking included are for PLAAF Chinese Air Force and Belorussian Air Force. Completed kit measures over 27" long with a wingspan of over 18"!
5743 1/700 USS Astoria CA-34 Heavy Cruiser, 1942 $36.95 Kit consists of 196 parts and features one piece upper hull, two piece lower hull, deck wood pattern, waterline plate, 8 inch gun turrets in great detail, two SOC Scout aircraft and a display stand with name plate.
6602 1/35 Dicker Max Tank Upgrade & Conversion Set for kit #348 $24.95 Contains 5 sheets of photo-etch parts & aluminum gun barrel.
7254 1/72 German Sdkfz 186 Jagdtiger (Henschel Production) Tank $19.95 Kit consists of 92 parts plus tracks & German Army markings.
7269 1/72 USMC Light Armored Vehicle -Recovery (LAV-R) $17.95 Kit consists of 70 parts plus tracks & US Marine markings.
April, 2008
394 1/35 Italian C1 Ariete Main Battle Tank with upgraded armor $42.95: Kit consists of 218 plastic parts on 5 sprues plus upper hull, lower hull, upgraded turret, additional updated armor and tracks, it also includes 1 sheet of photo-etch parts, a film sheet for windows and periscope lenses and towing cable. Markings are for the Italian Army.
1621 1/72 CH-47A Chinook Medium-Lift Helicopter $29.95: Kit consists of 111 parts on 4 sprues plus left and right fuselage halves. Completed model measures 10" wide (rotor) and over 16" long. Markings are for 1986 Texas National Guard and 1966 # 64-13108 test bed for the US Army Aviation Systems Command.
2256 1/32 Grumman F6F-3 "Hellcat" Fighter $89.95: Kit includes 364 parts on 10 sprues, photo etched part, clear engine cover & optional folding wings and flaps, and markings for Cmdr D. McCampbell CVG-15 Essex Oct 1944 & Lt Cmdr A. Vraciu VF-6 USS Intrepid Feb 1944. Completed kit measures over 12" long, wingspan of over 20".
5746 1/700 USS San Francisco CA-38 Heavy Cruiser, 1942 $32.95: Kit consists of 322 parts on 10 sprues plus upper hull, lower hull and optional waterline plate, plus 2 1/700 Sea Gull seaplanes. Markings are for Measure 21, 1942.. Completed kit measures just over 10" long.
6604 1/24 Photo-Etch Detailing Set for Hawker Hurricane $49.95: (For TSM kits #2414 to #2417). Set consists of 5 sheets of brass photo etched parts, a film sheet and 8 lengths of wire and plastic rods for the sub assemblies.
6605 1/350 Photo-Etch Detailing Set for Russian Navy Udaloy Class Destroyers $49.95: (For TSM kits #4516 & #4517). Set consists of 3 sheet of brass photo etch parts to upgrade the Udaloy destroyers.
6606 1/48 Photo-Etch Detailing Set for Westland Wyvern S. Mk4 $49.95: (For TSM kits #2820 & # 2843). set consist of 6 sheets of brass photo etched parts for upgrading the Wyvern.
February, 2008
211 1/35 MAZ-537G Soviet Tank Transporter with 5247G Semi-Trailer $149.95 100% NEWLY TOOLED! This gigantic kit consists of 492 plastic parts, including 25 clear, as well as 9 truck tires, 9 trailer tires, brass wires, 4 frets of photo-etched parts and die cut mask for window framing. Total parts count is 537. Markings are for the Soviet Army in green camouflage. Completed model measures over 26" long!
384 1/35 German E-100 Super Heavy Tank $64.95 Kit consists of 256 parts on 6 sprues, plus upper and lower hulls, a set of gull length tracks, and 6 photo etched engine bay grills. Completed kit measures over 12" long!
701 1/16 WWII Soviet Army Tank Crewman in 1942 $22.95 Kit consists of 27 parts on 3 sprues plus a display base. Also includes a photo-etched part for soldier's belt and a PPSH141 machine gun. Figure stands about 4" tall when assembled.
2417 1/24 Hawker Hurricane IID Trop Fighter $149.95 Kit consists of 223 parts, including 206 in plastic on 12 sprues, 3 rubber tires, photo-etched seat belts and a film instrument panel. Additional features: positionable wing flaps, fully detailed engine & optional clear cowling. Completed model measures over 16" long with a wingspan of 20".
5309 1/350 USS San Francisco CA-38 Heavy Cruiser, 1942 $64.95 100% NEWLY TOOLED! First Plastic kit ever produced of this vessel! Kit consists of 263 parts on 7 sprues plus lower and upper hulls, a waterline plate display stand photo etched mast and radar and markings for 1942 MS21. Completed kit measures over 20" long.
6607 1/35 LAV series 8x8 tire set, 325/85/ R16 XML (8pcs) $14.95 Extra tires designed for the LAV-25 kit of the USMC (TSM#349)
7265 1/72 German Pz.Kpfw KV-1 756(r) Tank $15.95 Kit consists of 85 parts on 6 sprues plus vinyl tracks and markings for the German Army.
7266 1/72 German Pz.Kpfw KV-2 754(r)Tank $15.95 Kit consists of 89 parts on 6 sprues plus vinyl tracks and markings for the German Army.
December, 2007
106 1/144 JMSDF Landing Craft/Air Cushion (LCAC) $37.95 Kit consists of 238 parts on 6 sprues plus a sheet of photo-etch parts for the nets and minesweeper.
369 1/35 German Panzerjagerwagen Variant II Armored Rail Car $49.95 Kit consists of 203 parts on 13 sprues plus photo etched details and markings for the German Army.
371 1/35 USMC LAV-C2 Light Armored Vehicle, Command & Control $32.95 Kit consists of 238 parts on 9 sprues with USMC markings.
378 1/35 German "Geschutzwagen" Tiger for 17cm K72 Gun $119.95 This is actually 2 kits in one: The Geshutzwagen Tiger and gun, with the gun unit able to be built independently of the tank for separate display. Kit consists of 556 grey plastic parts on 14 sprues plus hull and 2 full-length vinyl tracks, a set of photo-etched parts for the engine cover/dust-proof nets, and complete interior details including engine & transmission compartments. Markings include camouflage. Can be built with 170mm gun mounted or dismounted. Completed kit with gun mounted measures an enormous 13-14" long.
379 1/35 Russian PT-76 Model 1951 Amphibious Tank $39.95 Kit consists of 176 parts on 6 sprues plus a hull and vinyl tracks as well as a photo-etched part.
2304 1/35 German 15cm s.FH 18 Field Howitzer $39.95 Kit consists of 264 plastic parts on 6 sprues, bar frames and TPR rims, plus brass tubes, turned aluminum gun barrel, 100mm chain, & markings for German Army in field grey camouflage. Completed kit measures over 10" long
2827 1/48 Seahawk Mk100/101 Aircraft $44.95 Kit consists of 89 parts on 4 sprues plus a photo etched part and film instrument panel. 3 different markings for the West German Marines are included. Completed kit measures nearly 10" long with a wingspan of nearly 10".
5750 1/700 French Navy "Richelieu" Battleship, 1943 $34.95 Kit consists of 366 parts on 14 sprues plus lower hull, upper hull and waterline plate. Completed model measures 14" long.
7256 1/72 German Sturmgeschutz III Ausf. B Tank $15.95 Kit consists of 82 parts on 7 sprues, tracks and markings for German Army.
7257 1/72 German Sturmgeschutz III Ausf. C/D Tank $15.95 Kit consists of 82 parts on 7 sprues, tracks and markings for German Army.
November, 2007
385 1/35 German E-10 Tank Destroyer $39.95 Kit consists of 130 parts on 9 sprues plus hull, photo etch part, early/ late variants of vinyl/styrene tracks. German Army markings.
418 1/35 US Army in Iraq 2005 Figure Set (4 figures) $12.95 Set consists of 110 parts on 3 sprues plus a photo etch vinyl vests and earphone.
1632 1/72 P-40B/C Warhawk Fighter $15.95 Kit consists of 37 parts on 3 sprues and markings for 3rd Sqn China, 154th IAP Soviet Naval Aviation 1942, (Tomahawk I) RAF 349 Sqn West Africa, 1943.
2263 1/32 P-47D Thunderbolt Bubbletop Fighter $149.95 Kit consists of 462 parts on 17 sprues plus photo etch, film and metal parts. Completed kit measures nearly 14" long with a wingspan of over 15". Markings are for "LM-C" Frederick Christensen, England 1944, "Wee Speck" of 354th FG of the 9th AF, Capt. Lowell Brueland.
5307 1/350 USS Alabama BB-60 Battleship $139.95 Kit consists of 480 parts on 12 sprues plus lower and upper hulls, waterline plate and display stand. Markings are for 1942 Measure 12. Completed kit measures nearly 2 feet long!
5740 1/700 HMS Hood 1941 British Battleship $34.95 Kit consists of 429 parts on 16 sprues. Completed kit measures nearly 1" long.
7249 1/72 German Sd.Ah.116 Trailer $16.95 Kit consists of 89 parts on 3 sprues & markings for the German Army.
7275 1/72 German Sd.kfz. 9 (18t) Halftrack with Sd. Ah. 116 Trailer $34.95 Set consists of 440 parts on 12 sprues plus vinyl tracks and markings for the German Army.
October, 2007
383 1/35 German E-25 Tank Destroyer $41.95 Kit consists of 270 parts on 15 sprues a hull, 2 vinyl tracks, photo etch and markings for the German Army.
2415 1/24 Hurricane Mk IIC Fighter $149.95 Kit consists of 234 parts on 13 sprues, a photo etch part, full engine detail and markings for 3 Sqn 1942 & 87 Sqn Leader 1940/41. Completed kit measures over 16" long with a wingspan of 20".
2834 1/48 US Navy F9F-3 Panther Fighter $39.95 Kit consists of 124 parts on 4 sprues plus a photo etch part and a film instrument panel. Markings are for US Navy VF-51 in Korea. Completed kit measures about 9 ½" long with a wingspan of about 9 1/2 ".
7211 1/72 German Brummbar Mid Production Tank $15.95 Kit consists of 73 parts on 4 sprues with markings for the German Army.
7212 1/72 German Brummbar Late Production $15.95 Kit consists of 73 parts on 4 sprues, with markings for the German Army.
7267 1/72 Russian BTR-80 Armored Personnel Carrier $15.95 Kit consists of 67 parts on 3 sprues with markings for the Russian Army.
1/350 US Navy Helicopter Sets (6 per box) - SRP $8.95:
(for use on 1/350 Scale Ships.)
6231 MH-60S Knighthawk
6232 HH-60H Rescue Hawk
6239 SH-60F Oceanhawk
6240 SH-60B Seahawk
6253 SH-60J Seahawk
September, 2007
370 1/35 USMC LAV-R Light Armored Vehicle, Recovery $32.95 Kit consists of 267 parts on 9 sprues plus mkgs. for US Marine Corps.
1617 1/72 F-105D Thunderchief Aircraft $29.95 Kit contains 146 parts on 6 sprues plus markings for 334th, 466th & 419th squadrons of the Vietnam war. Completed kit measures over 11" long
1626 1/72 Wellington Mk 1C British Bomber $39.95 Kit consists of 192 parts on 10 sprues & includes positionable flaps. Markings are for P9245/OJ-W149th Sqn RAF Suffolk 1940 and R1006/GR-H, 301st Sqn RAF 1940. Completed kit measures about 7 1/2" long with a wingspan of about 9".
2830 1/48 Soviet Mig-3 Early Version Fighter $24.95 Kit consists of 81 parts on 5 sprues plus markings for VVS (Soviet Air Force). Completed kit measures nearly 7" long with a wingspan of over 8".
4519 1/350 Russian Navy Slava Class Cruiser "Varyag" $79.95 Kit consists of 406 parts on 19 sprues, a photo etched mast and mkgs. #011. Either waterline or full hull version can be built w/waterline plate included. Completed kit measures nearly 21" long.
7247 1/72 Sturmtiger Assault Mortar (Late Variant) $15.95 Kit consists of 125 parts on 6 sprues plus mkgs. for German Army.
7255 1/72 Stryker ICV Light Armored Vehicle $15.95 Kit consists of 66 parts on 3 sprues plus markings for US Army.
7274 1/72 Sturmtiger Assault Mortar (Early Variant) $15.95 Kit consists of 125 parts on 9 sprues plus mkgs. for German Army.
August, 2007
107 1/144 USMC Landing Craft/Air Cushion (LCAC) $35.95 Kit consists of 238 parts on 6 sprues, plus photo etched nets and sweeper. Completed kit measures over 7" long.
368 1/35 German Panzerjagerwagen Variant I Armored Rail Car $49.95 Kit consists of 187 parts on 6 sprues plus hull, plus photo etched parts and markings for the German Army. Completed kit measures nearly 11" long.
390 1/35 German Bridgelayer IVb $59.95 Kit consists of 778 parts on 21 sprues plus a hull, tracks, photo etched parts and markings for the German Army. The bridge sections are movable, and the kit can be built with the bridge section atop the tank or in the bridge-building mode.
1631 1/72 Hawker "Sea Fury" FB.11 Fighter $24.95 Kit consists of 93 parts on 4 sprues and markings for WJ232 802 sqn HMS Ocean 1952 and WE683 1831 Sqn 1953. Completed kit measures nearly 6" long with a wingspan of nearly 6 ½ ", and includes optional folding wings.
2259 1/32 F6F-5N Hellcat Fighter $89.95 Kit consists of 374 parts on 10 sprues, plus photo etched parts and markings for No 15 VF(N)-107 1944 & No 59 VMF(N)-541 1945. Included also is an optional clear engine cover as well as folding flaps and wings. Completed kit measures over 12.5" long with a wingspan of almost 16.5".
2262 1/32 P-47D Razorback Fighter $124.95 Kit consists of 428 parts on 17 sprues, plus metal and photo etched parts, a film instrument panel and markings for 42-72542 62nd FS/56th FG, Halesworth, Feb 1944 & William Dunham, Southwest Pacific 1943. Completed model measures over 13-1/2" long w/wingspan of over 15".
5754 1/700 USS Theodore Roosevelt CVN71 Aircraft Carrier, 2006 $94.95 Kit consists of 714 parts on 34 sprues, a photo etched mast and markings for CVN-71 2006. Included is an assortment of F14B/D, E2C, EA-6B, S-3B & SH-60B aircraft. Completed kit measures over 18" long.
7242 1/72 German Tiger I Tank, Early Variant $15.95 Consists of 99 parts on 6 sprues with German Army markings.
7243 1/72 German Tiger I Tank, Mid-Production $15.95 Consists of 81 parts on 7 sprues with German Army markings.
7244 1/72 German Tiger I Tank, Late Production $15.95 Consists of 73 parts on 7 sprues with German Army markings.
July, 2007
2255 1/32 Grumman F4F-3 Wildcat (Early version) Fighter $69.95 Kit consists of 267 parts on 7 sprues, plus photo etch parts and a film instrument panel. Markings are for VF-41 USS Ranger CV4, 1941 & VF-72 USS Wasp CV7 1941. Includes position-able flaps and a clear engine cover. Completed kit measures nearly 11" long with a wingspan of over 14".
2260 1/32 Messerschmitt Me-262A-1a Fighter with R4M Rocket $94.95 Kit consists of 409 parts on 12 sprues, plus metal landing gear, photo etched parts and a film instrument panel. Markings are for Me-262A-1a 9/KG(J)54.
5306 1/350 USS Massachusetts BB-59 Battleship (100% NEW TOOL!) $139.95 Kit consists of 365 parts on 12 sprues, plus lower hull, upper hull, decks and waterline plate. Display stand included. Markings are for 1946, measure 22. Completed kit measures nearly 2 feet long!
5753 1/700 USS Dwight D. Eisenhower CVN-69 Aircraft Carrier, 1978 $94.95 Kit consists of 684 parts on 32 sprues, and includes a photo etched mast and a clear deck plate in addition to a styrene plate. Markings are for CVN-69 1978. Completed kit measures nearly 19" long.
6603 1/35 M1126 Stryker ICV Upgrade Set (for TSM #375 kit) $24.95 Includes 6 sheets high-precision photo-etched parts plus 1 transparent film and 15 brass & ABS pipes/rods.
7230 1/72 Russian KV-1S Ehkranami Tank $15.95 Kit consists of 106 parts on 7 sprues and markings for the Soviet Army.
7231 1/72 Russian KV-1 Model 1942 Heavy Cast Turret Tank $15.95 Kit consists of 94 parts on 7 sprues and markings for the Soviet Army.
7232 1/72 Russian KV-1 Model 1941 Small Turret Tank $15.95 Kit consists of 86 parts on 6 sprues and markings for the Soviet Army.
7233 1/72 Russian KV-1 Model 1942 Lightweight Cast Turret Tank $15.95 Kit consists of 94 parts on 7 sprues and markings for the Soviet Army.
June, 2007
415 1/35 Modern US Army Figures: CH-47D Crew and Infantry SRP $29.95 For use with Trumpeter #5104 & #5105 and other kits. Set makes 5 figures and includes equipment, display base and a cockpit for use in making a diorama on the base provided. Kit consists of 95 parts on 7 sprues.
2232 1/32 F-100D Super Sabre Attack Fighter SRP $169.95 The first F-100 was delivered to the USAF in 1953, becoming the first fighter to break the sound barrier with a world record of 755 mph. Having been delivered near the end of the Korean War, the F-100 was used extensively in Vietnam.The "D" version of this fighter featured many additional components including flapped wings, internal electronic counter measure equipment and a low altitude bombing system. The F-100D flew with a single crew member and carried numerous bombs, rockets and missiles. Kit consists of 419 parts on 19 sprues, plus photo etch, a film instrument panel, metal landing gear and markings for the USAF 511th Fighter Bomber squadron, 405th Bomber Wing at Langley AFB, VA, May 195. Completed kit measures over 20" long with a wingspan of nearly 15"!
2416 1/24 Hawker Hurricane Mk IIC/Trop Fighter SRP $149.95 A newer variant of this British fighter, the Mk IIC featured an improved Merlin XX engine increasing performance and extremely low and high altitudes and modified wings which included a hardpoint for a 500 lb or 250 lb bomb, and later in 1941, fuel tanks. Kit consists of 233 parts on 13 sprues plus a photo-etched part and markings for 294th Sqn 1942 & 213th Sqn, 1944. Completed kit measures over 16" long with a wingspan of 20".
2843 /48 British Wyvern S4 Early Version Fighter SRP $54.95 A second variant of the Wyvern previously released from Trumpeter with a new canopy representative of this earlier variant. Kit consists of 224 parts on 7 sprues plus a film instrument panel. Completed kit measures over 10" long with a wingspan of 11". Includes markings for various Sqns from the HMS Eagle & HMS Peregrine.
4517 1/350 Russian Navy Udaloy Class Destroyer "Severomorsk" SRP $79.95 Launched in 1985, the Severomorsk was a Udaloy II class destroyer. As Russia's only multipurpose destroyer, it was intended to be the Russian counterpart to American Arleigh Burke class ships. The Udaloy-II was modified by the replacement of the SS-N-14 by the SS-N-22, reflecting a change in emphasis from anti-submarine warfare to anti-shipping. Kit consists of 390 parts on 17 sprues plus photo etch radar mast. Markings are for scheme 619 & 684. Completed kit measures over 18"L.
5739 1/700 USS Nimitz CVN-68 Aircraft Carrier, 2005 SRP $89.95 The newest variant of this carrier consists of 637 parts on 31 sprues, photo-etched and markings for CVN-68, 2005. Completed kit measures 19" long.
1/350 Scale Aircraft Sets: (Suitable for use on any 1/350 aircraft carriers. Markings for US Navy.) SRP $9.95/set
6233 F/A-18C Hornet (6)
6234 F/A-18D Hornet (6)
6235 F/A-18F Super Hornet (6)
6236 F-14B/D Super Tomcat (6)
6237 EA-6B Prowler (6)
6238 C-2 Greyhound (6)
1/72 Scale Tanks: Each SRP $15.95
7206 Soviet T-34/76 Mod 1942 Kit consists of 82 parts on 4 sprues, upper hull, lower hull plus tracks. Markings for Soviet Army.
7207 Soviet T-34/85 Mod 1944 Kit consists of 92 parts on 5 sprues, upper hull, lower hull, plus tracks. Markings for Soviet Army.
7208 Soviet T-34/76 Mod. 1943 Army Kit consists of 74 parts on 4 sprues plus tracks and hull. Markings for Soviet Army.
7209 Soviet T-34/85 Mod. 1944 Army Kit consists of 82 parts on 5 sprues plus tracks and hull. Markings for Soviet Army.
7272 Jagdpanther (Late Production Version) Kit consists of 81 parts on 3 sprues, upper hull, lower hull,
April, 2007
348 1/35 German Sfl. IVa "Dicker Max" Tank $42.95 it consists of 204 parts on 8 sprues, plus photo-etched and other metal parts.
363 1/35 German Panzer IV Ausf F Chassis Munitions Carrier, Expert Series $64.95
Kit consists of 674 parts on 15 sprues, 2 metal shells, 5 photo etched parts, 1 film
part, hull, tracks and markings for the German Army. Incredibly detailed!
2826 1/48 Hawker Seahawk FGA Mk6 British Fighter $44.95 Kit consists of 89 parts on 4 sprues, plus a photo etch part, film instrument panel and markings for HMS Bulwark 1956, HMS Albion 1959 & HMS Centaur 1959. Completed kit measures about 10" long with a wingspan of just under 10".
5308 1/350 "USS John W Brown" Liberty Ship $52.95 Kit consists of 349 parts on 9 sprues. Completed model measures over 15" long.
7216 1/72 Challenger II Main Battle Tank (KFOR) (Consists of 99 parts on 7 sprues) $15.95
7250 1/72 Italian C1 Ariete Main Battle Tank (Consists of 77 parts on 7 sprues) $15.95
1/350 Aircraft Sets - SRP $9.95/set
(Suitable for use on any 1/350 battleships/cruisers or dioramas.):
6249 US Navy OS2U Kingfisher (6)
6250 US Navy SC-1 Seahawk Seaplane (6)
6251 British Supermarine Walrus Biplane (6)
6252 British Fairey IIIF Recon Seaplane (6)
March, 2007
375 1/35 M1126 Stryker ICV (Infanty Carrier Vehicle) $39.95 Kit consists of 307 parts on 8 sprues plus a photo-etched part, marking for US Army. This is the first of its kind in plastic kit form!
2414 1/24 Hawker Hurricane Mk I British Fighter $149.95 Kit consists of 260 parts on 11 sprues plus a photo-etched part and a film instrument panel. Markings are for 257 Sqn England 1942 and 87 Sqn England 1942. Completed kit measures over 15" long with a wingspan of 20".
4518 1/350 "Moskva" Russian Navy Missile Cruiser $79.95 Kit consists of 409 parts on 19 sprues plus a photo-etched mast and radar unit. Optional waterline hull is provided. Markings are for #121. Completed kit measures nearly 21"L.
5735 1/700 "USS Washington" BB-56 Battleship $27.95 Kit consists of 254 parts on 12 sprues, plus an optional waterline hull. Completed model measures 12.5" long.
7214 1/72 British Challenger II Main Battle Tank SRP $14.95 Kit consists of 86 parts on 5 sprues, upper and lower hull, tracks and markings for British Army.
7215 1/72 British Challenger Main Battle Tank, Iraq $14.95 Includes additional armor, including complete fender skirts. Kit consists of 105 parts on 7 sprues, upper and lower hull, tracks and markings for British Army.
7241 1/72 Jagdpanther ( Mid-type) German Tank $14.95 Kit consists of 81 parts on 3 sprues, plus upper and lower hull and tracks. Markings for German Army.
February, 2007
215 1/35 Morser Karl Gerat 040/041 $92.95 Kit contains 1424 parts on 19 sprues, 7 metal parts & markings for the German Army. Kit includes 2 different chassis, tracks and wheel sets so the modeler has the option to construct either the early or late variant 040 or 041 models, an 8 figure gun crew as well as newly-designed photo etch part and two aluminum shells. (Munitions carrier not included.)
362 1/35 German Panzerkampfwagen IV D/E Fahrgestell "EXPERT SERIES" $64.95 Kit consists of 675 parts! On 15 sprues! Plus a photo-etched part. Markings for German Army in WWII.
2832 1/48 US Navy F9F-2 "Panther" Fighter 100% NEW TOOL! $39.95 Kit consists of 124 parts on 4 sprues, photo-etched parts and the completed kit measures 9 1/2" long with a wingspan of 9 ½".
2833 1/48 US Navy F9F-2P "Panther" Fighter $39.95 General kit specifications are the same as #2832 above, without arms but with photo equipment.
4516 1/350 Russian Udaloy Class Destroyer "Admiral Panteleyev" $79.95 First of its kind in plastic kit form! Kit consists of 398 parts on 17 sprues, plus waterline plate and hull. Mast and radar are photo-etched. Paint scheme #548 for Russian Navy. Completed kit measures over 18" long!
7239 1/72 US M113A2 Armored Personnel Carrier $14.95 Kit consists of 44 parts on 6 sprues.
7240 1/72 US M113A3 Armored Personnel Carrier $14.95 Kit consists of 48 parts on 6 sprues.
January, 2007
414 1/35 WWII Soviet Assault Red Army in Winter Gear Figures $9.95 (Contains 4 figures. 58 parts on 3 sprues.)
1630 1/72 British Fairey Gannet Mk 2 Aircraft $27.95 Kit consists of 102 parts on 4 sprues, with positionable flaps. Kit measures about 7.5" long with a wingspan of 9".
2823 1/48 British Wellington Mk III Bomber $109.95 Kit consists of 639 plastic parts plus photo etch and a film instrument panel. Markings are for No 115 Sqn RAF 1942 and No 425 Sqn RCAF North Yorkshire 1943. Completed kit measures over 15" long with a wingspan of about 21.5".
5906 1/144 USS Gato SS-212 Submarine 1944 $42.95 Kit consists of 127 parts on 7 sprues. Completed kit measures 26" long.
7226 1/72 M4A3 76(w) Tank $13.95 Kit consists of 90 parts on 6 sprues with markings for the US Army.
7229 1/72 M4A3E8 Tank with T-80 Tracks Korean War $13.95 Kit consists of 115 parts on 6 sprues w/mkgs for the US Army.
1/700 Aircraft Sets - SRP $6.95/set (Suitable for use on any 1/700 battleships/cruisers or dioramas.):
3447 US Navy OS2U Kingfisher (12)
3448 US Navy SC-1 Seahawk Seaplane (18)
3449 British Supermarine Walrus Biplane (12)
3450 British Fairey IIIF Seaplane (12)
December, 2006
413 1/35 WWII Soviet Tank Figures 9.95 Contains 6 figures in various poses.
2225 1/32 F4F-3 "Wildcat" Fighter (Late Variant) 69.95 Kit consists of 267 parts on 7 sprues, film instrument panel, clear engine cover and markings for VMF-244 Guadalcanal 1942 and VF-6 on USS Enterprise, 1942. Completed kit measures nearly 11" long with a wingspan of over 14".
5733 1/700 USS John C Stennis CVN-74 Aircraft Carrier 89.95 Kit consists of 665 parts on 29 sprues plus a photo etched mast and markings for CVN-74, 1998. Completed kit measures nearly 19" long.
5738 1/700 USS Saratoga CV-3 Aircraft Carrier 34.95 Kit consists of 375 parts on 24 sprues plus lower hull, upper hull, decks, waterline plate
and display stand. Markings for 1936. Completed kit measures over 15" long.
Due November, 2006
412 1/35 WWII Soviet Red Army Tank Soldiers SRP $9.95 Includes parts to construct 5 figures, in various poses.
2244 1/32 US Navy SBD-3 Dauntless "Midway" (Clear Edition) Aircraft SRP $139.95 Kit includes 257 parts on 17 sprues, photo-etch and film parts and markings for S-9 of the USS Yorktown, June 1942 & B-10 of VB-3 of the USS Yorktown, June 1942.
3905 1/144 Soviet Tu-142MR "Bear- J" Bomber SRP $54.95 Kit consists of 124 parts on 6 sprues. Flaps are positionable. Markings for the Soviet Air Force.
5734 1/700 USS North Carolina BB-55 Battleship SRP $27.95 Kit consists of 261 parts on 12 sprues, plus lower and upper hulls and waterline plate. Includes display stand. Markings are for 1944 Measure 32.
7237 1/72 US M113ACAV (Armored Cavalry Assault Vehicle) SRP $14.95 Armored Personnel Carrier used extensively in Vietnam. Kit consists of 55 parts on 6 sprues.
7238 1/72 US M113A1 Armored Car SRP $14.95 Kit consists of 47 parts on 6 sprues.
9900 Modeling Brush Set (7pcs) SRP $15.95 Includes 3-round brushes sizes #0, #1, & #2/0 and 4-flat brushes approx sizes ¼", 1/8", 3/16"& 7/32")
Due August, 2006
1/35 German PzKpfm KV-2 754(r) Tank Kit consists of 348 parts on 10 sprues plus hull and tracks. Markings are for the German Army, WWII.
1/48 Vickers Wellington Mk 1C British WWII Bomber Kit consists of 644 parts plus photoetch and film parts. Markings are for Nr 75 Sqn RAF Norfolk 1941 and Nr. 40 Sqn RAF Malta 1941. Completed kit measures over 15" long with a wingspan of over 21".
1/350 Buckley Class Destroyer USS England DE-635 Kit consists of 177 plastic parts on 9 sprues plus a photo-etch part. Markings are for 1945 measure 22 and 1943 measure 21. Completed kit measures over 10" long.
1/700 USS "The Sullivans" DD-537Destroyer $18.95 Kit consists of 121 parts on 7 sprues plus lower and upper hulls, decks, waterline plate and display stand. Completed kit measures 6 ½" long.
1/144 USS Gato SS-212 1941 Submarine Kit consists of 121 parts on 7 sprues with markings for year 1941. Completed kit measures nearly 26" long.
1/72 German 12.8cm Sf. L/61 (Pz.Sf.V) "Sturer Emil" Tank Kit consists of 110 parts on 6 sprues, mkgs for German Army.
Trumpeter pulls locomotive kit decals
Stevens International, the U.S. distributor of Trumpeter model kits, issued a statement on March 22 advising its vendors to make customers aware that no decals were included with the Trumpeter No. 210 Locomotive kit. This kit replicates the BR52 "Kriegslocomotive," an armored World War II German locomotive that displayed Nazi symbols.
According to Mike Bass, president of Stevens International, various countries receiving shipments from Trumpeter took issue with the Nazi symbols the model manufacturer reproduced on its decal sheets.
"In order to satisfy all markets, the decal sheets were pulled," Bass said, adding aftermarket decals that can be used on this kit are available in the U.S.
More Summer '05 Releases
2413 1/24 Supermarine Spitfire Mark VI A: Kit consists of 231 parts on 10 sprues, plus a metal flap shaft, a film instrument panel and photo-etched parts. Fully detailed engine and movable flaps are included, as well as markings for BR-5/H-NO. 124 Squadron July 1942 & AB534 "Eagle" Squadron. Completed kit measures over 15" long with a wingspan of over 20". (Bar Code 6922803624136)
2814 1/48 Fw 200C-4 Condor: This huge aircraft was used by the Germans as a heavy maritime patrol bomber, which searched the North Atlantic for convoys approaching Europe during WWII. Kit consists of 308 parts on 8 sprues plus a film instrument panel. Markings included are for F8 + CS of 8./KG 40, 1943 & F8+AA of 8./KG 40 1943. Completed kit measures over 19" long with a wingspan of nearly 27"! This long awaited kit will be one of the most popular new aircraft releases from Trumpeter this year! (Bar Code 6922803628141)
The Russian KV-1 tank was powered by a large diesel engine and was armed with a 7.62 cm gun and three machine guns: a bow machine gun, a coaxial machine gun and a rear machine gun used to prevent rear infantry assaults. The KV-1 saw its first action in December, 1939 and proved to be incredibly durable under extreme winter conditions.
356 1/35 Russian KV-1 (model 1941) Tank, Small Turret : Kit consists of 235 parts on 10 sprues, plus tracks and metal pin and brass wire. Completed kit is nearly 8" long.
359 1/35 Russian KV-1 (model 1942) Tank, Heavy Cast Turret: Kit consists of 227 parts on 9 sprues plus tracks, metal pin and brass wire. Completed kit measures nearly 8" long.
APPROXIMATE ARRIVAL: LATE SUMMER 2005
2235 1/32 Messerschmitt Me262 A1a. SRP $69.95: The Me262 A1a was Nazi Germany's most successfully produced fighter, moving from testing and development directly into production and combat. It could reach top speed of over 520 mph, had revolutionary swept back wings and a swept back tail. It nearly made the allied warbirds obsolete at the time. Kit consists of 355 parts on 9 sprues, metal landing gear, photo-etched parts, a film instrument panel and markings for Red 4 of 10/JG7 flown by Franz Schall. Completed kit measures about 13" long with a wingspan of about 15 1/2".
2240 1/32 Chinese Nanchang CJ6 Chinese Fighter. SRP $39.95: Based on the Soviet Yak 18, the CJ6 was produced in China and became a
member of the Chinese Air Force in the late 1950's. It was considered a sturdy and reliable aircraft, suitable for use in various climates and
therefore versions of the CJ6 were exported to many Asian and African countries. Over10,000 of these aircraft were produced in total. Kit
consists of 136 parts on 4 sprues, plus a film instrument panel and markings of the Chinese Air Force. Completed kit measures about 10 1/2"
long with a wingspan of about 12 1/2 "
350 1/35 German 12.8cm Tank Destroyer L/61 "Sturer Emil" Selbstfahrlafette: Only 2 prototypes of this gun were ever produced. It carried a 12.8
cm gun mounted in a casemate on the hull of a VK 3301, (the future Tiger tank). Development began in 1941 and the 2 prototypes were intended
to be placed in action in 1942 against the American and British bunkers and armor. However, they never saw such action, rather they were used
on the Eastern Front and in fact one was captured by the Russians in 1943. The first kit of its kind, it consists of 245 parts on 5 sprues plus a
lower hull, upper hull, turret and tracks. Paint scheme is for the Eastern Front in Autumn, 1943.
1616 1/72 RA-5C Vigilante Aircraft: A scaled-down version of the already announced 1/48 kit, it consists of 137 parts on 6 sprues plus additional tail parts and a film instrument panel. Flaps are positionable. Markings for Bu No. 156609, GJ-300 of RVAH-3 & 156639, GM603 of RVAH-9. Completed kit measures about 12 ½" long with a wingspan of nearly 9".
7203 1/72 Famo SdKfz 9/18ton Halftrack: Kit consists of 383 parts on 9 sprues plus clear pre-cut windows, rubber tires and markings for the 23rd Panzer Division on the Eastern Front, July 1943.
6306 1/72 North American P51D Mustang IV Aircraft -Assembled:(Markings 325FG 319FS flown by Ernie Beverly) This assembled plastic aircraft is pre-painted and decorated.
6307 1/72 North American P51D Mustang IV Aircraft - Assembled: (Markings 356FG 359FS flown by Jack Crump) This assembled plastic
aircraft is pre-painted and decorated.
326 1/35 JGSDF Type 82 6x6 Armored Command and Communications Vehicle: Placed into service in 1982, this vehicle saw its most
active role during peace-keeping duties in Cambodia. Eight personnel are carried, along with 12.7mm M2 heavy machine guns as well as a
7.62mm gun when needed. Top speed is over 60 mph. Kit consists of 218 injection molded parts on 4 sprues, upper hull, lower hull, metal axles,
photo-etched windshield wipers, complete interior details, clear plastic windows and periscope lenses and markings for JGSDF.
327 1/35 JGSDF Type 87 Armored Reconnaissance Vehicle: Placed into service in 1987, this vehicle is used for general patrol duty and reconnaissance missions. It carries a crew of 3 as well as a 7.62 mm gun and 25 mm cannons. Kit consists of 202 injection molded plastic parts on 3 sprues, upper and lower hulls, metal axles, photo-etch, clear plastic periscope lenses and markings for JGSDF.
330 1/35 JGSDF NBC (Nuclear and Biochemical) Detection Vehicle: In 1982 the Type 82 was placed into service as a converted communication and command vehicle specially equipped for the detection of hazardous materials and weapons. It's 6x6 configuration was designed to traverse terrains in all areas of the world. It was equipped with a 7.62 mm as well as a 12.7 mm machine gun. It is currently serving in Iraq. Kit consists of 243 injection molded plastic parts on 4 sprues, lower and upper hull, metal axles, photo-etched windshield wipers, interior details, clear plastic windows and periscope lens and markings for JGSDF.
355 1/35 Hotchkiss 38H(f) German Observation Tank: Some of these captured tanks were converted into "Grosser Funk" and "Befehlspanzer 38H(f)" heavy radio and observation tanks. Radios were added as well as a new highly armored superstructure. It was armed with one MG34 gun. Kit consists of 140 parts on 2 sprues, plus lower and upper hulls, tracks and markings for German Armed Forces.
409 1/35 German "Karl" Gun Artillery Figure Set (8): Set consists of 95 parts on 6 sprues.
1611 1/72 Jian-10 (J-10) Chinese Fighter Aircraft: The J-10 was originally developed in cooperation with Israel and is based on Israel's canceled Lavi program of the early 1980's. Collaboration on this Chinese fighter began in the late 80's, with Israeli engineering, Chinese design and Russian engines being combined to create a new delta winged advanced fighter. The first official flight took place in 1998, with subsequent test flights and training flights through 2003. The J-10 is considered one of the most advanced military aircraft in existence today despite the limited number in existence( possibly under 2 dozen) and its limited air time. It is expected to enter regular service in the Chinese Air Force in 2005. Kit consists of 99 plastic injection molded parts on 5 sprues, a film instrument panel, optional positionable flaps and markings for the Chinese Air Force. Completed model measures almost 9" long with a wingspan of just over 5".
102 1/144 WWII LCM(3) US Navy Landing Craft SRP $ 9.95 - - due January 2005
The LCM (Landing Craft, Mechanized) was used in WWII to transport troops & vehicles across the English Channel for the invasion of Normandy. The LCM(3) variant was developed with a longer hull & greater buoyancy in order to accommodate new heavier equipment such as 30-ton tanks. This kit is scaled down from the 1/72 release of this year. Kit consists of 48 parts injection molded plastic parts on 2 sprues plus the hull. Markings are for USN 1944 Normandy Landings. Completed kit measures 4"long and 1" wide.
408 1/35 WWII US Navy LCM Crew SRP $ 9.95
Consists of 3 figures. Total of 20 parts on 1 sprue.
332 1/35 Italian C-1 Ariete Main Battle Tank SRP $24.95 - - due January 2005
In 1984, the now OTOBREDA and IVECO formed a consortium to develop a new family of vehicles for the Italian Army. In 1998, the Ariete entered in the Italian active service. The layout of the C1 Ariete MBT is conventional with the driver at the front right, power operated turret in the center with commander and gunner on the right and loader on the left, & powerpack at the rear. The computerized fire control system includes day/night sights and laser rangefinder. It's armed with a 120/44 autostablized gun, a coaxial MG 7.62 machine gun to the main gun and another one for the tank commander. The main armament is also equipped with a bore evacuator, muzzle reference system and thermal sleeve. Kit consists of 227 injection molded plastic parts on 4 sprues plus lower hull, upper hull, turrets and tracks. Additional features include brass wire for the steel tow rope and clear plastic pre-cut film for periscope lenses. Markings are for Italian Navy. Complete kit measures 11" long and 4" wide.
1/32 Avengers - - due January 2005
Built in response to a 1939 requirement for a carrier-based torpedo-bomber to replace the TBD Devastator, the TBF Avenger proved one of the most versatile aircraft of World War II. Equipped with an electrically powered gun turret and an internal bomb bay, the aircraft carried a crew of three. All told, a total of 9,842 production versions rolled off assembly lines. The Avenger was the primary torpedo bomber of the US Navy during most of WWII. It earned a place in history during the Battle of Midway when almost all of the first TBFs to see combat were completely demolished before reaching their targets. Despite this, the TBF went on to have far greater success than the Battle of Midway later on, earning its place in history as a valuable torpedo bomber.
2233 1/32 TBF-1C Avenger Aircraft SRP $129.95
Kit consists of 489 injection molded plastic parts on 17 sprues, plus a clear rotating gun turret, rubber tires, metal aileron and flap shaft, photo etched aileron and flap hinges, engine ventilation grill & bomb bay doors, a film instrument panel, workable flaps and a fully detailed engine. Markings are for VT-2 TBF-1C(95) in June 1944, in tri-color scheme. Completed kit measures over 15" long with a wingspan of nearly 21".
2234 1/32 TBM-3 Avenger Aircraft SRP $129.95
Kit consists of 492 injection molded plastic parts on 17 sprues plus a clear rotating gun turret, rubber tires, metal aileron & flap shaft, photo
etched aileron & flap hinges, engine ventilation grill & bomb bay doors, a film instrument panel, workable flaps and a fully detailed engine.
Markings are for TBM-3, 89, of VC-94 onboard the USS Shamrock Bay, early 1945. Completed kit measures over 15" long with a wingspan of
nearly 21".
2809 1/48 RA-5C Vigilante Aircraft SRP $74.95 - - due January 2005
Testing of the Vigilante started in the late 1950's and continued through the 1970's. On December 13, 1960, the Vigilante set a world altitude record with payload, when it climbed to 91,450 feet with a payload of 1,000 kilograms. This surpassed the existing record by over 4 miles. The Vigilante was a supersonic, long range, all weather, carrier-based combat aircraft. Its first flight (attack version) was on August 31, 1958. A total of 79 Vigilantes were built. The remaining attack versions (A-5A's and A-5B's) were subsequently converted to RA-5C's. The last RA-5C fleet was disestablished in September 1979. Kit consists of 237 injection molded plastic parts on 8 sprues. Markings are for No 151726 of RVAH-5 USS America (CVA-66) and Nr 156624 of RVAH-6 USS Nimitz (CVN-68). Completed kit measures almost 19" long with a wingspan of over 13".
Trumpeter Announces 3 kits for November 2004
407 1/35 US Marine Corps Figures, Iraq 2003 SRP $ 9.95: Consists of 4 figures, M16A2, M203, M249 assault guns and other equipment. Total of 84 parts on 6 sprues.
1323 1/144 Japanese Kawanishi H6K5-L 4-Engine Seaplane SRP $16.95: Kit consists of 49 parts on 4 sprues. Markings for Japan in WWII. Completed kit measures 7" long with an 11" wingspan.
5904 1/144 USS SSN-21 Sea Wolf Attack Submarine SRP $ 32.95: This is a long-desired kit in this scale, and Trumpeter has once again answered to the modeler. Kit consists of 45 parts on 3 sprues, plus 2 hull halves. Completed kit measures approx. 29 1/2" long, 5" wide and 6 ¾" high.
Morser: 1/35 Morser Karl-Gerat 040/041 (initial version) on Railway Transport Carrier. SRP $ 159.95
Kit consists of 1361 parts on 30 sprues, plus lower and upper hulls, 2 tracks and 8 sections of railway. Includes metal axles and springs as well as photo etched mesh engine cover, collar and carrier handles. Additional features include a fully detailed interior, torsion bar, individual suspension, folding side platform, optional long exhaust pipes, elevating main gun and optional 60cm & 54 cm barrels with rifling and shells. Markings for Nr. I "Adam" 040/041 and Nr II "Eva" 040 in overall panzer gray, 1941. Completed kit measures 33" long, 4" wide and 5 ¼" high.
5301 1/350 WWII Liberty Ship "Jeremiah O'Brien" SRP $45.95: Kit consists of 268 injection molded plastic parts on 5 sprues plus a lower hull, upper hull (for optional waterline display) and a waterline plate. Completed model is over 15". Markings are for the 1944 invasion of Normandy
5606 1/350 "ADM. KUZNETSOV" SOVIET AIRCRAFT CARRIER SRP $199.95 - - due October, 2004
Also know as "Orel Class", the "Kuznetsov" was launched in the Black Sea in 1985. It is the only aircraft carrier in the Russian Navy. The "Kuznetsov" supports subs and surface ships in the Russian Fleet. The unusual design of this carrier includes a bow "ski-jump" take-off deck angled at 12 degrees. Kit consists of 755 parts on 24 sprues, plus a lower hull, upper hull, warterline plate (for optional waterline display), flight decks & display stand. Metal hull frame and screws are included. Aircraft included are (3) Su27K, (3) Mig29K, (4) Yak41M, (4) Ka27 (14 planes total), each with clear canopy and folding wings. Markings are for the modern Russian fleet. Completed kit measures over 34" long.
1/350 AIRCRAFT SETS FOR ADM. KUZNETSOV CARRIER (6 aircraft/box) - SRP $7.95/bx:
____**6215 SU27K Flanker D
____**6216 Mig29K Fulcrum D
____**6217 Yak41M
2411 1/24 FOCKE WULF Fw190D9 AIRCRAFT SRP $119.95 - - October, 2004
This long-awaited large-scale kit is finally coming! Kit consists of 150 parts on 7 sprues, metal aileron & flap shafts and springs, photo etched aileron and flap hinges and a film instrument panel. Included also is full engine detail with an optional positioning cowling as well as sprung landing gear. Markings are for Stab IV/JG3 March 1945, Prenzlau, Germany. Completed kit measures nearly 17" long with a 17 ¼" wingspan.
7213 1/72 WWII LCM(3) US NAVY LANDING CRAFT VEHICLE - - October, 2004
Scaled down from the 1/35 release of this year. Kit consists of 140 parts on 4 sprues plus the hull. Photo-etched machine gun brackets are also included. Markings are for USN 1944 Normandy Landing. Completed kit measures nearly 9" long.
1/48 CURTISS P40B WARHAWK - -
All New Tooling: (Tomahawk MkIIA) FIGHTER SRP $ 29.95
Scaled down from the original 1/32 release. Kit consists of 104 parts on 3 sprues, plus a photo etched engine vent grill. Markings are for the
British Royal Air Force, 112th Squadron, Egypt 1941, with sharkmouth design. Completed kit measures about 8" long, with a wingspan of over
9".
Trumpeter Nimitz
1/350 USS NIMITZ CVN68 AIRCRAFT CARRIER, 1975 SRP $199.95
Kit features 962 parts on 31 sprues plus lower hull, upper hull, waterline plate (for optional waterline or full-hull display), hangar decks, flight decks and display stand. Also includes metal hull frame and screws, and markings for the CVN-68 variant just after it was commissioned. Kit includes 22 aircraft, 8 different types, as follows: 1 SH3H Sea King Helicopter, 1 RA5C Vigilante, 6 F4J Phantom II, 1 E2C Hawkeye, 2 A3D Skywarrior, 3 A6E Intruder, 6 A7E Corsair, 2 S3B Viking. (Aircraft feature clear canopy & folding wings. Helicopter features clear fuselage & black rotors.) Completed kit measures a whopping 38" long, full single piece hull construction
TRUMPETER MODELS NEW TOOLING!
1/16 RUSSIAN T34/76 MODEL 1943 TANK SRP $167.95: The 1943 variant of this tank consisted of an additional cupola on top of the turret, allowing the commander to better lead in combat. This made the 1943 variant 15 cm higher that the 1942 variant. The turret's armor was also increased to 60mm increasing significantly the weight of this tank. The 1943 variant of the T34 proved to be a strong candidate to be the number one tank of all time taking into consideration its armor protection, its mobility and speed, and its tremendous firepower. Kit features 730 parts on 25 sprues, plus a lower and upper hull, lower and upper turret, 78 links each of toothed and flat tracks, and 12 piece rubber trim. 2 sets of photo etched grills also included, as well as full interior details. Completed kit is 16" long, 7 1/2 " wide and 6 1/2" high.
1/16 RUSSIAN T34/76 MODEL 1942 TANK SRP $167.95: The 1942 variant of the T34 tank took a large step forward from the original design with a larger turret with two hatches. The mantlet and driver window were also redesigned. The 1942 variant also featured thicker armour, better protecting the crew. Kit features 738 parts on 25 sprues, plus a lower and upper hull, lower turret and upper turret,78 tracks and links plus 20 pc of rubber trim. 2 sets of photo etched grills are also included, as well as full interior details. Completed kit is 16" long, 7 1/2 " wide and 6" high!
Landing Craft
347 1/35 WWII US NAVY LCM(3) LANDING CRAFT SRP $64.95
The LCM (Landing Craft, Mechanized) was used in WWII to transport troops and vehicles across the English Channel for the invasion of Normandy. The LCM(3) variant was developed with a longer hull and greater buoyancy in order to accommodate new heavier equipment such as 30-ton tanks. It could also handle up to 30 tons of cargo or 60 troops. One of the most important roles played by the LCMs on D-Day was the transport of advance engineer teams assigned the duty of demolishing beach obstacles placed by the Germans.
Kit consists of 161 injection molded parts on 6 sprues, plus the hull. Photo-etched machine gun brackets are also included. Markings are for the US Navy 1944 Normandy Landings. Completed kit measures 17" long and about 5"
Sukhoi Su27 Flanker due in September
The Su-27 was developed as a long-range air superiority fighter, having improved the quality of the former Soviet fighters. It's combat abilities compare roughly to the US F-15. Up to 10 air-to-air missiles can be carried and is equipped with a formidable front and rear radar system. This allows the Su-27 to fire at targets in front or behind the aircraft. The Flanker-B variant was placed into service in April, 1981, having been newly equipped with better aerodynamics and an aft radar extension.
Kit consists of 350 parts on 9 giant sprues plus upper and lower fuselage halves, canopy, nose radome and 3 rubber tires. Additional features include white metal landing gear & struts, PITOT head and flap shaft, photo-etched aileron and flap hinges and a film instrument panel. Markings are for the 582nd Fighter Regiment, 4th Air Army Frontal Aviation, Chojna, Poland, 1992. Operational parts include the flaps and speedbrake, and opening canopy. Completed kit measures 27 1/2" long with a wingspan of over 18".
___**346 1/35 M1 ABRAMS PANTHER II MINE CLEARING TANK SRP $24.95: This is an M1 Abrams tank specially modified for mine
clearing operations. Modifications include the removal of the turret and the installation of sophisticated mine clearing equipment (rollers) on the
front of the vehicle. This unmanned 43-ton remote controlled vehicle can clear a 50,000 square foot minefield in one hour without damage to the
vehicle itself. Kit features 503 plastic parts on 8 sprues, plus lower hull, upper hull, tracks and metal chain. Full mine clearing equipment
included. Markings for the 54th EN BN "Daggers" in Bamberg Germany, June 2002. Completed kit is over 12" long
___**1615 1/72 CHINESE SPACESHIP "SHENZOU-5" SRP $17.95: China's first manned spacecraft was successfully launched in October, 2003, making China just the third country to have launched a human into space with a successful return landing. It has an orbit module designed so it can spend more time in space for experiments than the space transporters of the USA and Russia. Kit features 83 plastic parts on 2 sprues plus a display plate. Completed kit is 6" long, with a wingspan of 10".
___**2404 1/24 SPITFIRE MK VB FLOAT PLANE SRP $119.95: Used for marine takeoff and landings in WWII, this aircraft saw significant action in wartime. Kit features 284 parts on 11 sprues, metal aileron and flap shaft, photo etched aileron and flap hinges, film instrument panel and full engine detail with clear engine cover. Markings for s/n w3760. Completed kit is 17" long with a wingspan of over 18".
___**323 1/35 British Challenger II Main Battle Tank "Operation Telic", Basra, Iraq 2003 $24.95: Kit features 435 parts on 8 sprues, plus hull, turret and tracks. Includes added skirts applied for Iraq operations. Markings for Iraqi Freedom Operation Telic. Completed kit over 13" long.
___**345 1/35 British Challenger II Main Battle Tank KFOR In Action At Kosovo $24.95: Kit features 435 parts on 8 sprues, plus hull, turret and tracks. Includes dozer blade. Markings for UK army KFOR in action in Kosovo. Completed kit is over 13" long.
___**406 1/35 "Leopold" German Railroad Gun Crew Figure Set $15.95: Includes 82 parts plus various weapons and equipment, enough to make 8 figures including an officer and seven crewmen in various poses. Suitable for use with DML or Trumpeter K5 Leopold kit.
___**1608 1/72 Xian Fbc1 "Flying Leopard" Chinese Supersonic Bomber $25.95: First shown in 1998, the FBC-1 is a twin engine, swept wing, 2 seat all weather attack bomber. It is equipped with a US-made GPS navigation system and is powered by 2 Rolls Royce WS-9 Spey engines, capable of flying this aircraft at 750 mph. This is one of the most advanced modern bombers in existence. Kit features of 86 parts on 5 sprues. The flaps are positionable. Markings included are for The Chinese Air Force. Completed model is 12" long and has a wingspan of 7".
___**6213 1/350 Kamov Ka27 Helix A Helicopter (6 Helicopters/Box) $7.95: Suitable for use with #4514 & 4515 Sovremenny destroyers. Six
helicopters per box, each with clear fuselage and black folding main rotor. Each helicopter consists of 14 parts. Markings for Soviet Navy,
Russian North Fleet & Ukrainian Navy. 6" high!
Trumpeter Announces 1st QUARTER 2004 Releases
2410 1/24 NAKAJIMA A6M2N ZERO "RUFE" FLOATPLANE SRP$119.95: Kit features 181 parts on 8 sprues, as well as metal aileron and flap shaft, film instrument panel and engine detail. Marking for 802 Kokutai, Solomons, Jan.1943. Completed kit is about 17" long with a 20" wingspan.
5103 1/35 MiL Mi24V HIND-E SRP $129.95: Kit features 468 parts on 12 sprues, plus transparent canopy, metal poles, photo-etched rain sweeper & antenna, film instrument panel, detailed double engine, clear cowling, detailed cockpit & cargo cabin. Markings for Czech & Russian Mi24V. Completed kit is about 22" long with a 19" rotor diameter.
1609 /72 TUPOLEV TU142MR BEAR-J RUSSIAN BOMBER SRP $109.95: Kit features 204 parts on 9 sprues. Markings for Russian Air Force. Complete kit is about 27" long with a 27" wingspan.
2227 1/32 LOCKHEED P38L LIGHTNING AIRCRAFT SRP $119.95: Kit features 362 parts on 19 sprues, plus rubber tires, metal aileron and
flap shaft, photo-etched aileron and flap hinges, photo-etched engine intake net, film instrument panel, full detail engine and workable flaps.
Markings for the 431st Fighter Squadron, 475th Fighter Group & 5th Air Force Squadron. Completed kits is about 14" long with a 19" wingspan.
2228 1/32 CURTISS P40B WARHAWK MK IIa "TOMAHAWK" SRP $49.95: This famous World War II fighter is actually a modification of the
earlier P-36, using the newer Allison engine. This new fighter was now able to perform on the same level as the Messerschmitt, giving the allies a
new weapon in their battles. Kit features 181 parts on 5 sprues, as well as a metal aileron and flap shaft, photo etched aileron and flap hinges and
a film instrument panel. Complete engine detail is included. Markings are for the 26th Squadron of the RAF, Gatwick, June-July 1941. Completed
kit is about 12"L with wingspan of 14". 1/350 USSR SOVREMENNY CLASS PROJECT 956 DESTROYER SRP $49.95: The Sovremenny
Class Destroyer is similar in size to the USA Navy's Aegis cruiser. It is commonly armed with an anti-submarine helicopter, air defense missiles,
torpedoes, mines, guns and a sophisticated electronic warfare system. First commissioned in 1985, a total of 18 have been built for the Soviet
Navy, and two for the Chinese Navy. Kit features 380 parts on 8 sprues, plus the upper hull, lower hull (for optional waterline construction),
waterline plate and decks. Includes also photo-etched radar brace frame and a Ka-27 helicopter with clear fuselage and black rotor. Markings for
Soviet Navy. Completed kit is about 18" long.
1/350 USSR SOVREMENNY CLASS TYPE 956E DESTROYER SRP49.95: A variant of the above ship modifications for Type E service. Kit features of 395 parts on 8 sprues, plus the upper hull, lower hull (for optional waterline construction), waterline plate and decks. Includes also photo-etched radar brace frame and a Ka-27 helicopter with clear fuselage & black rotor. Markings for Soviet Navy. Completed kit is about 18" long.
Trumpeter Models Mig 3 and Soviet Cruisers
____**2230 1/32 MIG3 FIGHTER SRP $47.95: The Mig-3 was developed from the earlier Mig-1 with a few modifications to improve handling. It surprised the Luftwaffe with its high-altitude intercepting and reconnaissance abilities. It served throughout World War II and because of its easy maintenance and repairability, became one of the most durable fighters of the war. Kit features 134 parts on 5 sprues, metal aileron and flap shaft and photo-etched aileron and flap hinges. Markings for the 12 Guards IAP Air Defense (Moscow) March 1942. Completed kit is about 10 long with a wingspan of about 12 ½ .
These Soviet Cruisers, when first constructed, were the largest war-ships in existence, besides aircraft carriers. They first entered service in 1980 and are classed as nuclear propelled missile cruisers by the West. The Kirov class ships featured a 100cm thick armored hull, very unusual in modern warships. In addition an 80mm thick armored wall surrounded the command room. Each carried 3 anti-submarine helicopters. After the collapse of the Soviet Union, new military economics made in impossible to continue the costly upkeep of these cruisers, so their reactors have not operated since 1992.
____**5707 1/700 USSR KIROV SOVIET NAVY BATTLE CRUISER SRP $22.95: Renamed "Admiral Ushakov" after the collapse of the USSR. Kit features 252 parts on 8 sprues, plus an upper hull, lower hull (for optional waterline construction), waterline plate, deck and display stand. Markings for USSR Navy. Complete model is 14" long.
____**5708 1/700 USSR FRUNZE SOVIET NAVY BATTLE CRUISER SRP $22.95: Renamed "Admiral Lazarev" after the collapse of the USSR. Kit features 264 parts on 9 sprues, upper hull, lower hull (for optional waterline construction), waterline plate, deck and display stand. Markings for USSR Navy. Completed model is 14" long.
2221 1/32 Vought F4U-1D Corsair. Kit consists of 355 parts on 10 sprues, metal aileron and flap shafts, photo-etched aileron and flap hinges, film instrument panel, three rubber tires, cowling, engine detail, optional clear cowling and folding wings. Markings for VMF-312 "White 530", Okinawa, 1945. Completed kit is almost 13" long, with a wingspan of over 15". SRP $69.95
2222 1/32 Vought F4U-4 Corsair. Kit consists of 350 parts on 10 sprues, three rubber tires, cowling, metal aileron and flap shafts, photo-etched aileron and flap hinges, film instrument panel, engine detail, optional clear cowling and folding wings. Markings for F4U-4 white 13/BuNo 80879 Capt. Kenneth A Walsh, VMF-222, Okinawa, and June, 1945. Completed kit is almost 13" long with a 15" wingspan. SRP $69.95
203 1/35 German Faun "Elefant" SLT56 Tank Transporter (Tank not included). Kit consists of 804 parts on 16 sprues, 35 (that's right!) tires, cab, frame and transporter deck. Photo-etched grills and markings for German Army SFOR in Bosnia included. This huge completed kit is over 22" long and has a 4-axle transport trailer and a 4-axle cab. This kit has been anticipated for years and is the first of its kind!
2201 1/32 Republic F-105D "Thunderchief". Kit consists of 514 parts on 28 sprues, rubber tires, metal aileron and flap shaft, photo-etched aileron and flap hinges, film instrument panel, and engine and gun detail. Completed kit is over 2 feet long and has a wingspan of over 13"! Two markings included:
-S/N 59-1822 44th Tactical Fighter Squadron, 355th Tactical Fighter Wing, pilot Don Kutyna "Polish Glider".
-S/N 62-4338 355th Tactical Fighter Wing Col. Jack Broughton Vice Commander "Alice's Joy"
2202 1/32 Republic F-105G "Wild Weasel". Kit consists of 517 parts on 19 sprues, rubber tires, metal aileron and Flap shafts, photo-etched aileron and flap hinges, film instrument panel, engine and gun detail. Completed kit is over 2 feet long with a wingspan of over 13"! Two markings included:
-S/N 62-4440 17th Wild Weasel Squadron, 388th Tactical Fighter Wing
-S/N 63-8320 562nd Tactical Fighter Squadron, 35th Tactical Fighter Wing "Hanoi Hustler"(Triple Mig Killer)
2302 1/35 Chinese BJ212 Military Jeep with soft canvas top. Kit consists of 167 parts on 5 sprues, 4 tires, body, frame and markings for Chinese Army Service. Completed kit is over 4" long, 2" wide.
1/35 Chinese 105mm Type75 Recoilless Rifle. Kit consists of 75 parts on 3 sprues. Decals for Chinese Army. completed Model 4" long SRP $9.95
1/24 A6M2b Model 21 Japanese Zero Fighter. Kit consists of 193 parts on 9 sprues plus metal aileron & flap shafts, photo-etched aileron & flap hinges, film instrument panel, rubber tires, engine detail, sprung landing gear & decals for Akagi 2nd squadron ,2nd section #1 Pearl Harbor attack. (Completed model is 15" Long with a 20"wingspan) SRP $106.95
1/350 Aircraft Carrier U.S.S. Yorktown CV-10 1944(Late War Version) Kit consists of 678 parts on 25 sprues, plus 1-piece upper & lower hull sections (optional waterline hull included). Also included are full hangar& flight decks, display stand, markings for service in the Philippines 1944, 16 folding wing aircraft (4 each Hellcat, Helldiver, Avenger and Corsair) are provided. Completed model is 30" long. SRP $119.95
1/350 Vought F4U Corsair Airplane Set. 6 aircraft included each with gray fuselage, black landing gear, clear canopy, and folding wings. Includes marking for Air group 4, VME-124, and Essex 1945 SRP $7.95
1/35 CHINESE TYPE 83 TANK with 152MM SELF-PROPELLED GUN-HOWITZER Kit Features: 353 parts on 10 sprues plus lower/upper hulls, tracks and engine detail. Includes markings for Chinese Army. Completed model: 8"long, 4"wide. This tank is the Peoples' Liberation Army's standard heavy howitzer. It entered service in the early 1980s and was present in large numbers for service in Korea and against the Russians.
1/35 CHINESE TYPE 89 TANK with 120MM SELF-PROPELLED ANTI-TANK GUN Kit Features: 339 parts on 10 sprues plus lower/upper hulls, tracks and engine detail. Includes markings for Chinese Army. Completed model: 9"long, 4"wide. This tank was first fielded in China in small numbers in the late 1980s.
1/35 CHINESE TYPE 89 TANK with 122MM MULTI-BARREL ROCKET SYSTEM Kit Features: 356 parts on 11 sprues plus lower/upper hulls, tracks and engine detail. Includes markings for Chinese Army. Complete model: 8"long, 4"wide. The Type 89, a Chinese tank chassis variant of the Russian BM21 rocket launcher, can fire 40 122mm rockets in 20 seconds. The launcher is at the back of the vehicle and the reload pack at the front.
1/35 BRITISH CHALLENGER II MAIN BATTLE TANK Kit Features: 414 parts on 6 sprues plus hull and tracks. Includes markings for UK Army KFOR in action at Kosovo. Completed model: 13"long, 4"wide. Although similar in appearance to Challenger I, the Challenger II MBT has many improvements including a brand new turret armed with the latest 120mm L30 rifled tank gun firing a new APFSDS-T (Armor Piercing Fin Discarding Sabot Tracer) projectile with a depleted uranium penetrator. Standard equipment includes thermal camera over the manlet of the 120mm gun and a NBC (Nuclear, Biological, Chemical) system.
1/32 YAKOVLEV YAK 18 "MAX" 2-SEATER PRIMARY TRAINER AIRCRAFT Kit Features: 123 plastic parts on 7 sprues plus rubber tires, engine detail, clear engine cowling, metal & photo-etched aileron/flap parts, instrument panel. Includes markings for Soviet, North Korea and Chinese Air Force. Completed kit: 10"long, 13"wingspan. In May 1945, Yakovlev initiated the design of the YAK 18 two-seater primary trainer. This new aircraft flew a year later powered by a Shvetsov M11 5-cyclinder radial engine and features a retractable tail wheel landing gear.
"USS HORNET" AIRCRAFT CARRIER AIRCRAFT
(10 AIRCRAFT/BOX) - $12.95 PER BOX
B25B MITCHELL AIRCRAFT SET
F4F4 WILDCAT AIRCRAFT SET
TBD1 DEVASTATOR AIRCRAFT SET
SBD3 DAUNTLESS AIRCRAFT SET
The 1/350 "USS HORNET" AIRCRAFT CARRIER kit will have a hanger deck as well as a flight deck to display numerous aircraft on the finished kit.
1/35 BRITISH 155MM AS90 SELF-PROPELLED HOWITZER Kit Features: 309 parts on 7 sprues, plus hull & tracks. Includes markings for British Army SFOR. Completed model: 12"long, 4"wide.
1/35 JGSDF TYPE 89 IFV TANKKit Features: 400 parts on 7 sprues, plus hull & tracks. Includes markings for JGSDF. Completed model: 8"long, 4"wide.
1/48 AEROSPATIALE AS365N DAUPHIN 2"JAPANESE DOMESTIC RESCUE"Used for civilian missions by Japanese rescue squads. Kit Features: 110 parts on 5 sprues. Completed model: 10"long, 10"rotor
1/72 TUP0LEV TU95MS BEAR H BOMBER: Kit Features: 171 parts on 9 sprues. Finished kit is a huge 27" long, 27" wingspan! Includes markings for USSR Air Force.
1/24 NORTH AMERICAN P51D MUSTANG IV FIGHTER: Kit Features: 288 parts on 14 sprues. Finished kit is 16" long, 18" wingspan. Includes metal aileron and flap shaft, three resin pilot figures, photo-etched hinges, acetate instrument panel, three rubber tires and markings for Lt. Col. Glenn T. Eagleston of 354th FS/353rd FG during April 1945.
1/35 MIL Mi4A HOUND A SOVIET HELICOPTER: Kit Features: 209 parts on 6 sprues. Finished kit is 17" long, main rotor diameter is 23". Includes photo-etched engine cooling reticulation, acetate instrument panel and markings for Czech AF, USSR AF, China AF & China Civil Aviation.
1/350 US AIRCRAFT CARRIER "USS HORNET" CV8: Kit Features: 433 parts on 17 sprues; plus lower hull, waterline plate, decks, flight deck and display stand. Finished kit is 28" long, 4" wide. Includes various deck aircraft including B25 Mitchells. Markings for Tokyo Raid & Battle of Midway.
1/72 NORTH AMERICAN F107A ULTRA SABRE PROTOTYPE AIRCRAFT: On September 10, 1956 the F107A, which was originally designed as a tactical fighter-bomber version of the F100, made its initial fight.Three F107As were built as prototypes and were test flown extensively, but the aircraft did not go into production. Features 58 plastic parts on 4 sprues. Includes markings for three different versions: 55-5118, 55-5119, 55-5120. Completed model: 12" long, 6" wingspan.
US BATTLESHIP "USS MISSOURI": The Missouri is the third ship of the Iowa Class battleships which was one of the most famous in US Navy history. She participated in almost all major sea battles since its entry into US navy service in WWII. In 1980, the Reagan administration ordered the reactivation of the battleship. It was modernized with missiles & electronic equipment and reentered into service in July 1986. In January 1995, four years after participating in the Gulf War with the USS Wisconsin, she was finally deactivated. (15" long; appx 220 pieces on 8 sprues)
US BATTLESHIP "USS WISCONSIN" : The construction of USS Wisconsin began at the Philadelphia Navy Yard in January 1941, the fourth ship of the Iowa Class battleships. It entered service in April 1944 as part of the 3rd fleet in the Pacific. After WWII the Wisconsin returned home and served as a training ship. In 1980, the Reagan administration ordered the reactivation of the battleship. It was re-equipped with missile launchers, missiles & a helicopter deck. In September 1991 she was place on reserve duty & is now moored at the Norfolk Navy Yard in Virginia.(15" long; appx 220 pieces on 8 sprues)
1/72 NORTH AMERICAN P51D MUSTANG AIRCRAFT: (BUILT UP PLASTIC)
Each painted and decorated. Includes display stand. Window boxed.
P51D Mustang Aircraft (Markings: P51D 55th FG, 8th AF.)
P51D Mustang Aircraft (Markings: T.J. Christian's "LOU IV", E2*C, s/n 413410, 375th FS, 361st FG, 8th AF.)
P51D Mustang Aircraft (Markings: USAAF HI-G, s/n 4474878 with registry N6306T.)
1/35 IS-IIIM Russian Heavy Tank: This updated version of the IS3 tank was first built in 1959, updating the IS-II by adding hull braces, additional access covers, 7.62 coaxial machine guns, night vision, etc. Features: 228 parts on 4 sprues, plus hull and tracks. Completed model: 8"long, 4"wide. Includes markings for Soviet Army & Egyptian 4th Armored Div., Cairo 1967.
1/48 MIG 15 UTI "Midget" : First appearing in the 1950's over Korea, its performance over existing Western fighters was far superior. It featured a high set swept wing and a high tail plane and nose intake. The "Midget" was the trainer version Mig 15.Features: 137 parts on 5 sprues. Completed model: 8" long, 8" wingspan. Includes markings for Soviet Air Force & Pakistani Air Force.
1/48 MIG 15 bis Fagot-B: Developed just before the Korean War, the Mig 15 was as a single seat advanced fighter. It had a single VK1 engine and carried 37mm & 23mm guns as well as 500kg bombs.Features: 136 parts on 5 sprues. Completed model: 8"long, 8"wingspan. Includes markings for Soviet Air Force/North Korea, 1952 and Chinese People's Volunteer Air Force/Korean War, 1953.
1/700 "USSR MINSK" Aircraft Carrier: The Minsk was the second carrier in the Soviet "Kiev" class. Launched in 1975, it later joined the Soviet navy in active duty in the Pacific Fleet. There are 8 fore missile launchers and many on both the starboard & port sides, and is equipped with four 76mm guns. Features: 123 parts on 3 sprues, plus a 2pc. hull, deck bridge and 2 brass propellers. Completed model: 15"long, 3"wide, 4"wide. Includes markings for 3 different Kiev class carriers.
1/144 Russian Kilo Class Attack Submarine, Type 636: Launched in 1980, the Kilo is a modern diesel submarine, so quiet that it can detect enemy sub at a range 3-4 times greater than it can be detected itself. The Type 636 was designed for anti-submarine and anti- ship warfare, as well as for general reconnaissance and patrol missions. It consists or 6 watertight compartments in a double hull and is equipped with eighteen 533mm torpedoes. Features: 53 parts on 3 sprues, plus an upper waterline hull. Completed model: 20"long, 6"high, 4"wide. Includes markings for Russian Navy
1/20 CHINESE TYPE 98 STREAMLINED MAIN BATTLE TANK (NEW TOOL) Features: 337 parts, including 2pc hull, turret, barrel, wheels & 168 workable track links. Includes Chinese PLA markings. Completed model: 21"L x 7"W x 6"H. Suitable for R/C. Hardware not include This tank is the third generation of the Chinese designed MBT similar to the American M1A1 or the German Leopard II. It includes 1 125mm smoothbore main gun.
1/35 T55 1958 TYPE TANK WITH BTU55 DOZER PLOW : (MODIFIED TOOL)Features: 250 parts on 9 sprues plus hull & tracks. Markings for Finnish Army.) (The Russians developed the Dozer blade to fit their T54/55 tanks. The device on front of Dozer blade is a depth regulator to prevent the blade from digging excessively & stopping the tank.)
1/35 BJ212A CHINESE ARMY JEEP WITH 105MM TYPE 75 RECOILLESS RIFLE: (NEW TOOL) (Features: 235 parts on 8 sprues plus body & rubber tires. Markings for Chinese PLA Shock Team.) Mounted 1975 gun suited for all-terrain use. Carries armor-piercing projectiles capable of destroying medium size tanks. Used primarily by specialty teams.)
1/48 HH65A "DOLPHIN" SEARCH + RESCUE US COAST GUARD HELICOPTER: (NEW TOOL) (Features: 91 parts on 5 sprues.) (The US Coast Guard has added 96 short range HH65A helicopters to its fleet to replace the HH52A Sikorsky Sea Guard. Though normally stationed ashore, they can be carried on board assisting in the missions of search + rescue including drug interdiction, polar ice breaking, marine environmental protection, pollution control & military readiness.)
1/48 Z9G CHINESE ARMORED HELICOPTER: (Features: 114 parts on 6 sprues. Markings for Chinese Air Force.)The Z9G is an armed helicopter developed from the Z9A and can be used for anti-tank attack, ground fire suppression, scattered target attack, anti-terror assault, aerial patrol, communication, etc. when equipped properly. The Z9G is powered by two WZ8A turbo shaft engines. The Z9G can be equipped with missiles, rockets, cannons, machine guns, etc. and attacks the target very accurately by utilizing special electronic devices.)
1/48 SA365N DAUPHIN 2 TWIN-ENGINE HELICOPTER : (NEW TOOL)Features: 92 parts on 5 sprues. Markings for Icelandic Coast Guard & Chinese Harbin Z9A) (Used by many countries as a general purpose aircraft. It was modified from the SA360 with 2 engines instead of one and a triangular shaped landing gear.)
1/100 ANTONOV AN12BK CUB (NEW TOOL): (Features: 186 parts on 4 sprues. Markings for Russia & China.) (A large durable transport
plane having served in the Air Forces of Argentina, China, Ethiopia, India, Iraq, Poland, Yugoslavia & more. Also used for civilian transport. In the
1990's, it was replaced by the IL76 after having served in the Soviet- Afghanistan War.)